MC 30-4

MC 30-4

---------- Max. lifting height
3000 KG Max. Lifting Capacity
3435 MM Turning radius
500 MM Load center of gravity

Manitou arazi tipi forkliftler, kompakt yapısı sayesinde dar alanlarda yük taşımaya uygundur. Sağlam yapısı sayesinde, arazi koşullarının neden olduğu burkulma kuvvetine dayanacak şekilde özel olarak tasarlanmış direklere sahiptir. Ahşap, madencilik veya inşaat sektörlerinde kullanılan bu makine, Manitou'nun 60 yıllık deneyiminin bir sonucudur. Ayrıca, farklı uygulamalarınıza uyum sağlayacak geniş bir lastik yelpazesine sahiptir. Kaput, bakımı kolaylaştırmak için bileşenlere (göstergeler, filtreler, motor...) kolay erişim sağlar.

Review the Document SEE ATTACHMENTS
Capacities
 MC 30-4
Power sourceDiesel
Operator typeSeated
Max. capacity3000 KG
Load center of gravity500 MM
Wheelbase1900 MM
Weights
 MC 30-4
Standard mast reference of the machineFVD 33
Service weight4440 KG
Weight on front axle (laden) / rear axle (laden)6650 KG / 790 KG
Weight on front axle (Unladen) / rear axle (Unladen)-
Wheels
 MC 30-4
Tires typePneumatic
Number of front wheels / rear wheels2/2
Number of drive wheels4
Front wheel gauge1159 MM
Rear wheel gauge1176 MM
Dimensions
 MC 30-4
Height of overhead guard (cabin) 2155 MM
Seat height/stand height1094 MM
Overall length4235 MM
Length to face of forks 3085 MM
Overall width1450 MM
Forks section / width / length 45/100/1200 MM
Ground clearance below mast 300 MM
Ground clearance at centre of wheelbase310 MM
Turning radius3435 MM
Performances
 MC 30-4
Travel speed (laden / unladen)12 km/h / 24.50 km/h
Lifting speed (laden / unladen)0.47 m/s / 0.46 m/s
Lowering speed (laden / unladen) 0.50 m/s / 0.30 m/s
Drawbar pull (Laden / Unladen) 3100 daN
Gradeability (laden / unladen) 46 %
Service brakeHydraulic brakes by loss of pressure
Transmission TypeHydrostatic
Motor Rating-
Battery voltage / capacity-
Hydraulic pressure-
Oil flow rate42 l/min
Engine
 MC 30-4
BrandKubota
Engine Power50 Hp
Rated speed2700 rpm
Number of cylinders3