160 ATJ+ e RC
Opt for an ultra-performing and versatile all-terrain lifting solution with the 160 ATJ+e 4x4 100% electric boom lift! Take advantage of its performance to optimize your operations on rough, uneven or muddy terrain or even indoors thanks to its zero emission energy. Its 4 steering wheels allow you to evolve in the most difficult terrains.
Equipped with transmission decks, this Manitou model has all the features to facilitate your work at height:
spacious and resistant basket, important ground clearance, active oscillating axle, 4 driving wheels, 4 steering wheels, continuous rotation as an option, important load capacity (408 kg), 4 simultaneous movements...
The 160 ATJ+e 4WS articulated aerial work platform allows you to work safely up to a height of 16, outdoors or indoors, thanks to the 100% electric motor and therefore without Co2 emissions. A plus: the slinging without lifting beam, faster for your teams.
Review the Document SEE ATTACHMENTS| Working height | 16.22 m |
| Platform height | 14.22 m |
| Maximum outreach | 8.34 m |
| Overhang | 7.44 m |
| Pendular arm rotation (left / right) | 90 ° / 90 ° |
| Pendular arm rotation (top / bottom) | +66.50 ° / 65.80 ° |
| Platform capacity | 408 kg |
| Turret rotation | 360 ° |
| Platform rotation (right / left) | 90 ° / 90 ° |
| Number of people (indoor / outdoor) | 3 / 3 |
| Platform weight* | 7790 kg |
| Platform dimensions (length x width) | 2.30 m x 0.90 m |
| Floor height (access) | 0.42 m |
| Overall length | 6.88 m |
| Overall width | 2.38 m |
| Overall height | 2.48 m |
| Overall length (stowed) | 4.70 m |
| Overall height (stowed) | 2.94 m |
| Counterweight offset (turret at 90°) | 0.37 m |
| Counterweight Oversize / Reach | 0.37 m |
| External turning radius | 3.78 m |
| Ground clearance at centre of wheelbase | 0.39 m |
| Wheelbase | 2.30 m |
| Drive speed - stowed | 5 km/h |
| Drive speed - raised | 1 km/h |
| Gradeability | 45 % |
| Permissible leveling | 5 ° |
| Tires type | Foam Filled Non Marking |
| Standard tires | 914 x 381 mm / 36X15D610 |
| Drive wheels (front / rear) | 2 / 2 |
| Steering wheels (front / rear) | 2 / 2 |
| Braking wheels (front / rear) | 0 / 2 |
| Battery voltage | 48 V |
| Battery nominal voltage / capacity | 48 V / 480 Ah |
| Battery energy | 23 kWh |
| On-board charger (V / A) | 48 V / 60 A |
| Number of cycles with STD Battery (HIRD) | 50 |
| Ground Pressure | 11.60 daN/cm2 |
| Hydraulic Pressure | 250 bar |
| Hydraulic tank capacity | 24 l |
| Vibration on hands/arms | < 2.50 m/s² |
| This machine is in compliance with: | European directives: 2006/42/EC- Machinery (revised EN280-1:2022) - 2004/108/EC (EMC) - EMC according to EN 12895 / 2015 +A1 / 2019 |

